strikingly best website builder

New Philips Sonicare Toothbrush not Charging No Light – 5 Ways To Fix & Reset

Is Your Sonicare Toothbrush Not Charging Here Are 4 Easy Ways to Fix It

Sonicare toothbrushes are often touted as an effective way to prevent gum disease since they provide gentle brushing action.

In case you haven’t bought one before, let us show you exactly why the Sonicare toothbrush produced by Philips has won over millions of customers around the globe.

There are various types of brushes depending on the user’s specific needs. For example, electric toothbrushes offer better cleaning ability than manual ones because they move faster.

Electric toothbrushes come in two categories: power models or rechargeable models.

Power models usually include replaceable heads. Rechargeable models come with rechargeable batteries. The main difference between these two types is the length of time they last.

Not only did they last longer, but they also performed well and didn’t leave your teeth feeling dry after using them.

Their design was comfortable as well. These 2 new models are both powered by rechargeable battery packs.

Both models have unique features such as a timer, pulsating brush head, anti-bacterial action, LED indicator lights, programmable settings, etc.

Basics Behind Philips Sonicare Won’t Turn On Or Charge

The Sonicare is an electronic toothbrush made by Philips that uses a rechargeable battery.

A charger for the battery is used, and it connects to a regular power outlet. As far as the circuit board and battery are not the problems, the Sonicare toothbrush’s charging issue may be resolved.

The Circuit board and rechargeable battery cannot be changed. The board is interconnected with the battery; removing any of them will harm the board.

The complete Sonicare toothbrush has to be replaced if the battery won’t recharge.

Why Philips Sonicare won’t Turn on or Charge – 5 Possible Reasons

1. Problematic plug

Check to see if the plug you are using is genuinely working in the first place. It’s conceivable that everything you have is functional, and the issue is with the plug. The best way to test this is by inserting a different device into the same socket.

2. The toothbrush is not charged enough.

Put the handle of your toothbrush on the charger to charge it. The toothbrush will be charged when the buzzer or battery light flashes.

For around 24 hours, your Philips Sonicare should be charging. During charging, the flashing light frequently goes off at some time.

3. Faulty charger

The charger can be faulty if it is unable to recharge a toothbrush. Check the charger’s functionality by placing your toothbrush on it. The charger must be changed if the brush battery light is not on.

4. It might be interfering with other metal surfaces.

Different metals or other chargers can cause your charger to malfunction. Do not place the charger on the surface of the metal or next to other chargers. Retry by relocating the charger to a different spot.

Move the charger to a different location to see if that changes anything. Put your charger somewhere else if it is currently on a metal surface.

5. Charging time

You could have underestimated the Sonicare toothbrush’s charging time, which is one potential issue.

Try to charge the toothbrush properly for 24 hours if the plug functions and the correct charger is used. The majority of Sonicare toothbrushes contain a flashing indicator light when charging.

4 Ways To Resolve Charging Problems – Philips Sonicare Toothbrush Reset Tips

1. Input the power switch.

The top button switches the mode, while the bottom toggles the power. Ensure you are hitting the right button since the mode button will not switch the toothbrush.

2. Insert the Sonicare toothbrush’s base into the charger.

Connect the charger to a working outlet. Give the toothbrush a full day to charge. The LED will glow solid green whenever the toothbrush is ultimately charged. Continue to the following step if the Sonicare brush still won’t charge.

3. Connect to a different power outlet if first caused the issue.

Check the new outlet’s functionality before connecting the charger to it. The LED light on the charger must now turn on, and it could beep three times if the initial outlet caused the problem. Give it a full day to charge.

4. Disconnect the charger from the outlet.

To clean the charger, use a moist cloth to wipe the surface. Place the charger away from the sun so it can dry. Plug the Sonicare brush in the charger once the charger has dried out and been plugged back into the outlet.

The rechargeable battery or the circuit board may malfunction if there is no LED light. There will be a requirement for a new toothbrush.

Simply put, your battery can be dead. When you place the toothbrush on the charger, the LED lights should ideally turn on to indicate that it is charging. The battery must be changed to a newer one if it stops charging.

You can try if the device’s bottom is dripping with water or if the lid is damaged. When the backwash accumulates in the charging cup, water damage happens.

Make sure your charging cup is dry and liquid-free at all times. Use hot water and mild soap to wash your toothbrush, then pat it dry with a towel.

If the issue still exists, you can think about taking the plastic casing off and drying the parts.

If your Sonicare toothbrush won’t turn on, there are a few possible solutions you can try

Check the battery:

Make sure that the battery is charged and properly installed. If the battery is low, try charging it for a few hours before attempting to turn the toothbrush on again.

Check the power cord:

If the toothbrush is plugged into an outlet, make sure that the power cord is securely connected and that the outlet is working.

Reset the toothbrush:

Some models of the Sonicare toothbrush have a reset button that can be used to resolve issues with the toothbrush. Consult your user manual for instructions on how to reset your specific model.

Replace the battery:

If the battery is old or damaged, it may not be able to hold a charge or power the toothbrush properly. In this case, you may need to replace the battery.

Contact customer service:

If none of the above solutions work, the issue may be with the toothbrush itself. In this case, it is recommended to contact the manufacturer’s customer service for further assistance.

How to Charge a Philips Sonicare Toothbrush?

You can charge your Philips Sonicare toothbrush differently depending on the model. Make sure the charger you use fits the toothbrush that came with it. Not every Sonicare charger works with another charger. The charger may have a USB-A connector that needs a wall adapter. 

  • Connect the charger to a power source.
  • Put the handle of the toothbrush on the power supply.
  • When your toothbrush is charging, the battery indicator will flash. It will stop flashing when ultimately charged, which could take up to 24 hours. 
  • The battery life of your toothbrush won’t be impacted if you leave it on a plugged-in charger between brushes. 

3 Ways to Charge The Sonicare Toothbrush 

Using Charging Glass

  • After setting your toothbrush on the charging base, place its handle inside the charging glass or stand.
  • Connect the charging base to a power source.
  • When your toothbrush is charging, the battery indicator will begin to flicker green or white. When completely charged, which could take up to 24 hours, it will stop flashing.

Using Travel Case.

  • Place the toothbrush handle into the travel case.
  • Attach a small USB cord to the travel case.
  • Use a 5V IPX-4 USB wall adapter to connect the USB cord to.
  • When your toothbrush is charging, the battery indicator will begin to flicker green or white. When completely charged, which could take up to 24 hours, it will stop flashing. 

Using a Wireless Charging Pad

  • Place the adapter into an outlet and insert the USB cable into it.
  • The toothbrush should be placed upright on the charging pad’s raised surface.
  • When your toothbrush is charging, the charging pad will beep, and the battery indicator will flash white. It may take up to 12 hours when fully charged, at which point it will cease to flash and turn solid white.

Philips Sonicare All Lights Flashing on Charger

Understanding The Lights

Your Sonicare Toothbrush’s green and yellow lights aren’t just for show. They convey essential information about the device’s status.

Sonicare toothbrush flashing green light typically indicates that the toothbrush is on and functioning, while the flashing yellow light signifies that the battery level is between 10% and 50%. 

The mode indication is an additional light. This will indicate which of the three cleaning modes—clean, sensitive, and massage—your Sonicare is currently in. The matching hues are, in order, pink, purple, and blue.

The battery indication is an additional light. This is also relatively simple: your battery situation is resolved if it is green.

It will soon need to be recharged if it begins to flicker red. 

4 Reasons for Philips Sonicare Toothbrush All Lights Flashing

Battery Issues

One common culprit for flashing lights is a depleted or malfunctioning battery. 

Overheating Problems

Continuous usage or environmental factors can lead to overheating. Discover how to allow your toothbrush to cool down effectively.

Software Glitches

Just like any electronic device, Sonicare toothbrushes may encounter software issues. Learn how to update or reset the toothbrush software.

Malfunctioning Components

Sometimes, the flashing lights indicate more profound issues with internal components. 

The Bottom Line

Is your Sonicare toothbrush from Philips not charging? To attempt to resolve this charging issue on your own, utilize these potential causes and fixes.

If the battery indicator light is flashing, your toothbrush is charging, or you hear a beep.

Your Sonicare toothbrush has been fully charged. Always use the original charger if at all possible.

Leave a Reply

Your email address will not be published. Required fields are marked *

All Categories